How To Make Airstream Cabinets
While the sky is the limit for the amount of money a person can spend renovating a vintage trailer, we were adamant to making it wait great without spending a fortune.
We looked into having custom cabinets made, or even ownership a fix from our local big-box store, we only could not bring ourselves to pay those kinds of prices.
After spending some time rummaging through flea markets and thrift stores, we finally found these mismatched beauties, still in the box, on Craigslist for $twenty each. They are standard measurements thirty" wide and 22" deep. (We knew we wanted to paint them a white, shabby-chichi, which can be found here. You could certainly purchase a matching set up and follow the installation)
The beginning thing we had to do was fit them into the galley space, with one overlapping a cycle well. We put both cabinets side-by-side and using a pencil, traced the edge of the wheel well so nosotros would know where to cut.
Once we had our lines, nosotros carried them back out and set to cutting.
It took some creativity and every cutting tool we had in our armory, from jigsaws to cutting blades on a drill and Dremel.
Doesn't accept to exist perfect; just has to fit over the bike well.
The next step was literally making a square peg fit a round pigsty. Every bit you lot know, Airstreams do not accept flat walls. We attached 2x4 blocks to the wall using wide 50-brackets. (The Fifty-brackets were screwed into the blocks, and the blocks were riveted to the wall.)
Next we mounted the cabinets to the blocks using long wood screws and a 1/4'' strip of plywood to provide more than support and sturdiness.
Using some other piece of 1/4'' plywood to fill the open seam between the cabinets; we secured them together.
To create a side panel so the cabinets match the bend of the wall, nosotros took a piece of cardboard to create a curved template. One time we knew the template fit, we cutting out the curved slice from 1/viii" plywood. If you desire a flat surface, you can only stain or paint your slice and attach it using wood screws and liquid-nails. Make certain to sand and roughen the side cabinet before mounting.
To create the forest-plank wait, we used the piece of plywood that had been cut from the cardboard template and cut it into equal strips, mounting them individually.
How To Make Airstream Cabinets,
Source: https://www.wundertow.com/airstream_cabinets.html
Posted by: hestertoeopla.blogspot.com
0 Response to "How To Make Airstream Cabinets"
Post a Comment